Yes, you can burn a CD using ImgBurn, and for many people it is still one of the most reliable ways to do it. ImgBurn is a freeware optical disc authoring and burning program by LIGHTNING UK!, and it supports CD, DVD, HD DVD, and Blu-ray. Its last version, 2.5.8.0, came out on 16 June 2013, and it has had no updates since then, with no official Windows 11 support, though users report that it still works on Windows 10 and 11. That age can put people off, but CD burning is a stable job, and ImgBurn was built for it. You can make an audio CD or a data CD, or burn an ISO file to a CD, if you pick the right mode and use good media.
What you need before you start
You need a PC with a CD, DVD, or Blu-ray drive that can write CDs, a blank CD, and the files or image you want to burn. ImgBurn is Windows only, and its installer is tiny, at about 3 MB. Get a clean or no OpenCandy build from a trusted source, such as Ninite or a trusted mirror, and read every installer screen so you can decline all optional offers. Never download ImgBurn from a random mirror, because some mirrors carry real malware. Antivirus tools often flag the installer as a PUP or adware, not a virus, because old versions bundled the Ask.com toolbar or OpenCandy offers, though the producer removed the adware component on 23 June 2016. For blank media, use a CD-R, which you can write once, or a CD-RW, which you can rewrite. A standard CD holds 700MB or 80 minutes of audio, so check the total time before you burn.
Pick the right ImgBurn mode for your CD
ImgBurn has five modes, and picking the right one is half the job. Read creates an image file from a disc. Build creates an image file from files and folders, and it is the mode you use for audio CDs and data CDs. Write writes an image file to a disc, and it is the mode you use for an ISO file. Verify checks a disc against its image, and Discovery tests drive and media combinations. For CD burning, you will use Build or Write in almost every case. Use Build mode when you start with files, such as music tracks for an audio CD, or documents and photos for a data CD. Use Write mode when you start with an image file, such as an ISO or CUE file, and you want that exact image written to the CD.
How to burn an audio CD with ImgBurn
An audio CD is the job where ImgBurn still shines, because it gives you control over the write type and the write speed. Open ImgBurn and choose Build mode. Add your audio files, such as WAV or MP3 files, and ImgBurn will handle the audio CD layout for you. Check the track order and the total time, and make sure the total fits inside the 80 minute limit of a standard CD-R. Set a volume label if you want one, and choose the DAO or SAO write type for audio. Pick a slowish speed for old players, because a fast burn can still skip in an old car stereo. Insert a blank CD-R, start the burn, and let ImgBurn finish and verify the disc, then test it in the player you plan to use.
How to burn a data CD with ImgBurn
A data CD is simpler than an audio CD, because you are just storing files on a disc. Open ImgBurn and choose Build mode. Add the files and folders you want on the disc, and check the total size against the 700MB limit of a standard CD-R. Set a volume label that tells you what is on the disc, and pick a write speed that suits your media. A moderate speed is a good default for data, because a very fast burn can raise the error rate, while a very slow burn wastes time for no clear gain on a modern drive. Insert a blank CD-R or CD-RW, then start the build. ImgBurn will create the disc image from your files and write it to the disc. Let it verify the disc after burning, because that check catches a bad burn before you delete the files from your PC or hand the disc to someone else.
How to burn an ISO file to a CD with ImgBurn
Burning an ISO file to a CD uses Write mode, not Build mode, and the steps are short once you know them. Open ImgBurn and choose Write mode. Select the ISO or CUE file you want to burn, and check that you have picked the right file. ImgBurn supports many image formats, including BIN, CCD, CDI, CUE, DI, DVD, GI, IMG, ISO, MDS, NRG, and PDI. Insert a blank CD-R into your drive, set the write speed, and click the big Write button. Let ImgBurn write the image and then verify the disc against the image if that option is on. The key point is to write the image, not to copy the ISO file onto the disc as a data file. In Write mode, ImgBurn writes the image contents to the disc in the right layout.
Common CD burning failures and how to fix them
Most CD failures come from a short list of causes. Bad or cheap media is the top cause, followed by a dying drive, too fast a write speed, a dirty lens, and the wrong mode for the job. If a burn fails, try a different blank disc from a different pack or brand before you change any settings. If the same disc fails in the same way, try a slower write speed, close other programs, and check that you are using Build mode for files and Write mode for images.
- Bad or cheap media: try a fresh CD-R from a known brand, and check for scratches or dust.
- Too fast a write speed: lower the speed, especially for audio CDs for old players.
- Dying drive or dirty lens: try another drive if you can, and clean the lens properly.
- Wrong mode: use Build mode for audio and data CDs, and Write mode for ISO files.
- External drive problems: try another USB port or cable, and do not move the drive.
- Permission problems: run ImgBurn as administrator, and try Windows 7 or 8 compatibility mode.
ImgBurn also keeps a log that can point to the exact error. Use View, then ImgBurn Log, and look for the error text. An I/O Error or a Power Calibration Area Error usually points to a media or drive problem. A Power Calibration Area Error in particular means the drive could not calibrate the laser power for that disc, and that is often a sign of bad media or a failing drive. In that case, change the disc first, then try another drive, and update the drive firmware if an update is available.
Tips for better CD burns on Windows 10 and 11
A few habits make CD burning on Windows 10 and 11 more reliable. Run ImgBurn as administrator, because that avoids permission problems with the drive. Use Windows 7 or 8 compatibility mode if ImgBurn will not start or will not see your drive. Keep other programs closed during a burn so nothing interrupts the write, and lower the write speed if a burn fails or if a disc skips in an old player. Check the ImgBurn log after a failure instead of guessing, and use the exact error text to decide your next step. An audio CD for a car needs a slow burn and a test in that car, and a data CD needs verification.
Conclusion
Yes, you can burn a CD using ImgBurn, and it handles the three common CD jobs well: audio CDs in Build mode, data CDs in Build mode, and ISO files to CD in Write mode. Add your WAV or MP3 files for audio, use DAO or SAO write type, and pick a slowish speed for old players. Add your files for a data CD, stay inside the 700MB limit, and verify the disc when it is done. Select your ISO or CUE file in Write mode, insert a blank CD-R, set the write speed, click the big Write button, and verify the result. Use good media, run ImgBurn as administrator, and check the log when a burn fails. With the right mode and a careful burn, ImgBurn still makes CDs you can trust.
Read next: How to Burn an ISO File with ImgBurn
Read next: How to Burn a DVD with ImgBurn
Read next: How to Copy a Disc with ImgBurn

Pingback: How to Burn an ISO File with ImgBurn
Pingback: How to Burn a DVD with ImgBurn