How to Burn a DVD with ImgBurn

How to Burn a DVD with ImgBurn

Burning a DVD with ImgBurn is simple once you know which mode to use, and that is where most people get stuck. ImgBurn gives you five modes, and each one does a different job, so picking the wrong one can waste a blank disc. This guide covers the three common DVD jobs: burning a DVD Video disc from a VIDEO_TS folder, writing an ISO image to a blank DVD, and burning a data DVD from files and folders. ImgBurn is freeware by LIGHTNING UK!, and the latest and final version is 2.5.8.0, released 16 June 2013. It has had no updates since, and it has no official Windows 11 support, but users report it still works on Windows 10 and 11.

What You Need Before You Start

You need a Windows computer with a DVD burner drive, a blank DVD, and a clean copy of ImgBurn. ImgBurn is Windows only, though it works under Wine per the official docs. If your drive is an external USB drive, plug it straight into your computer, not through a cheap hub. Close other programs before you burn, especially anything that might try to use the drive at the same time. For a standard DVD Video disc or a data DVD, a DVD-R or DVD+R is the usual choice, and both are write once discs. A DVD-RW or DVD+RW disc is rewritable, so you can erase it and use it again. A standard single layer DVD holds about 4.7 GB, so your files or your image need to fit inside that limit.

  • A Windows computer with a working DVD burner drive
  • A blank DVD with enough capacity for your files or image
  • A clean copy of ImgBurn, version 2.5.8.0
  • Your source files ready, such as a VIDEO_TS folder or an ISO image
  • A few spare blank discs, in case the first burn fails

Step 1: Get a Clean Copy of ImgBurn

ImgBurn has an adware history you should know about before you install it. Versions 2.5.1.0 through 2.5.7.0 bundled the Ask.com toolbar. Version 2.5.8.0 switched to OpenCandy offers in the installer distributed directly from imgburn.com, while the versions from the official mirror sites were adware free. The producer removed the adware component on 23 June 2016, and OpenCandy itself was discontinued in August 2016. Antivirus tools often flag the installer as a PUP or adware, not a virus, and the program itself is clean. Still, get a clean or no OpenCandy build, for example via Ninite or a trusted mirror, and read every installer screen and decline all optional offers. Never download ImgBurn from a random mirror, because some of those carry real malware. Open ImgBurn and you will see its five modes: Read, Build, Write, Verify, and Discovery. For burning a DVD, use Build for a DVD Video disc or a data disc, and Write for an ISO image. If ImgBurn will not start on Windows 10 or 11, run it as administrator and try Windows 7 or 8 compatibility mode.

Step 2: Burn a DVD Video Disc from a VIDEO_TS Folder

If you have a VIDEO_TS folder, you already have the files for a DVD Video disc, and Build mode is the right tool. Click Build on the main screen. In the source area, choose the folder that contains your VIDEO_TS folder. Set the destination to your DVD burner drive, not to an image file, because you want a finished disc. Before you click the big Build button, pick a volume label, which is the name your computer and your DVD player will show for the disc. Pick a write speed that suits your media. The fastest speed is not always the best speed, and a slower burn is often more reliable, especially with cheap discs or an older drive. Insert your blank DVD, click Build, and let it finish without opening other programs. ImgBurn cannot create DVD menus, and it cannot transcode video, so your VIDEO_TS folder needs to be ready to burn as it stands.

Step 3: Burn an ISO Image to a DVD

Burning an ISO image to a DVD is the simplest DVD job in ImgBurn, and it uses Write mode. Click Write on the main screen. Click the folder icon next to the source box and pick your ISO file. ImgBurn supports a long list of image formats, including BIN, CCD, CDI, CUE, DI, DVD, GI, IMG, ISO, MDS, NRG, and PDI, so your image will usually load without any fuss. Check that the destination shows your DVD burner drive. Insert a blank DVD with enough capacity for the image, and check the size shown in ImgBurn against the capacity printed on the disc. An ISO that is bigger than the disc will not fit. Set your write speed before you click the big Write button. If the ISO is important, or the disc is cheap, pick a speed below the maximum. Turn on Verify if you want ImgBurn to read the finished disc back and compare it with the image. Click the big Write button and wait. Do not open the drive tray, do not unplug an external drive, and do not shut the computer down while the burn is running.

Step 4: Burn a Data DVD from Files and Folders

A data DVD is just a disc that holds files, and Build mode handles it. Click Build, then add the files and folders you want on the disc, using the add buttons and the file picker. Note that ImgBurn has no drag and drop support, so use those buttons to build your list. Watch the size bar at the bottom of the screen. It shows how much space your files take up, and it will warn you when you pass the capacity of a standard DVD. Keep your total under 4.7 GB for a single layer disc, and leave a small margin rather than filling the disc to the very last megabyte. Set the destination to your DVD burner drive, pick a volume label that tells you what is on the disc, and choose a write speed. Turn on Verify if the files matter, because a data disc with a silent error is worse than a failed burn you can see. Click the big Build button, let ImgBurn write the disc, and wait for verification to finish if you turned it on. When it is done, open the disc in File Explorer and check that your files are there and that they open.

What to Do When a Burn Fails

A failed burn is frustrating, but it is usually a media or drive problem, not a mystery. Start with the ImgBurn log. Open View, then ImgBurn Log, and look for the exact error. An I/O Error points to a read or write problem, and a Power Calibration Area Error usually means the media or the drive is at fault. Try a different blank disc first, and try a different brand if you can, because bad or cheap media is the most common cause of failed DVD burns. Next, lower the write speed and close other programs. If you are using an external drive, try another USB port or cable, and plug it straight into the computer. Update your drive firmware if the maker offers an update, and clean the drive lens if the drive is old or dusty. If every disc fails on one drive but works on another, the drive is likely dying. ImgBurn has had no updates or security fixes since 2013, so it cannot fix a worn out drive, but its log will usually point you straight at the problem.

Conclusion

Burning a DVD with ImgBurn comes down to picking the right mode, using good blank media, and setting a sensible write speed. Use Build mode for a DVD Video disc from a VIDEO_TS folder and for a data DVD from files and folders, and use Write mode for an ISO image. Set a clear volume label, turn on verification for discs that matter, and read the ImgBurn log if a burn fails. ImgBurn is old, it is Windows only, and it has no updates since 2013, but it is still a small, free, and accurate burning tool when you use a clean copy and good discs. Keep a few spare blanks on hand, burn at a moderate speed, and let verification do its job.

Read next: Can I Burn a CD Using ImgBurn?

Read next: How to Burn an ISO File with ImgBurn

Read next: How to Copy a Disc with ImgBurn

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top